Sales and production discontinued

CP-1003TXN 110 03

CP-1003, CPU, ETH100/10, 1x RS485, 1x SCH, 8xAI/DI, 8DI/HSC, 4xAO, 8xRO, 4xDO, 2xTCL2

DI	8x DI / AI see AI 8x DI / HSC
DO
AI	8x DI / AI see DI
AO	4x AO
COM	1x ETH 10/100 1 × RS-485 1-3x Serial channel (1x free slot) 2 × TCL2 master
SENSOR

Picture	Variant	Variant description
	CP-1003
	CP-1013

The basic module CP-1003 is equipped with eight multi-purpose inputs, each of which can be used either as

analog (voltage, current or for passive temperature sensors) or as
binary 24V, eight fast binary inputs with adjustable decision level
four analog outputs ± 10 V,
eight relay outputs and
four fast transistor outputs with the possibility of direct connection of DC or stepper motors.

The CP-1003 basic module is equipped with a central unit (CPU) of the L series, which is designed for applications with performance requirements.
It contains backed up CMOS RAM for user programs, data, tables, user registers and DataBox, Flash memory for user backup
program, slot for MMC / SD / SDHC memory card, real-time circuit, Ethernet interface, up to 4 serial channels (one with fixed RS-485 interface, another with slot
for the optional submodule) and two TCL2 system interfaces for connecting expansion modules that increase the number of I / O systems.

Order num.	TXN 110 03
Teco code	TXN 110 03
Categories	Foxtrot 1 - Basic modules
Tags	Sales and production discontinued

System parameters of the central unit
Row of central unit	L
User program memory	384 + 64 kB
Memory for user variables / including RETAIN variables	192 kB/48 kB
Instruction length	2 ÷ 10 bytes
Backup of program source code in PLC	Yes, in program backup memory (EEPROM)
On-line program change in PLC	Yes, including I / O configuration change
Memory for project archiving - internal	2 MB
DataBox - additional internal data memory	512 kB
Optional memory card slot	SD - Card Slot
Cycle time per 1k of logic instructions	0,2 ms
Development environment	Mosaic
Programming languages	ST, IL, LD, FBD, SFC, CFC
RTC - Real time circuit	Yes
RAM and RTC backup 1) without / with backup battery	type. 500 hr / typ. 20,000 hours
Integrated Web server	Yes
Integrated Datalogger	Yes
Access to PLC variables via web API	Yes
Notice	1) Applies to the basic module without power supply, the backup circuits are disconnected when the power supply is switched on 2) The serial interface CH1 is permanently equipped with an RS-485 interface. The serial interface type CH2 to CH4 is selectable via interchangeable submodules
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx)	1
Available system modes on ETH and WLAN	UNI, PC, PLC, PLD
TCP / IP protocol	Yes
UDP protocol	Yes
HTTP protocol	Yes
Protocol MODBUS/TCP	Yes
SMTP protocol	Yes
IEC 60870-5-104 protocol	Yes
REST API	Yes
COM - Serial channels
max. number of optional serial channels in the basic module	4
max. number of expanding serial channels on the TCL2 bus	6
Number of internal RS-232 serial channels	1
Available system modes on CH5-10	UNI, CSJ (CAN)
Modbus RTU / ASCII master protocol	Yes
Modbus protocol RTU/ASCII slave	Yes
Profibus DP master protocol (<180 kbit/s)	Yes, on serial channels supporting PFB mode
COM - System buses
TCL2 - system I/O bus	2x TCL2 master
TCL2 - Range of one branch of the system I/O bus	10 I / O modules + 4 operator panels + 6 serial channels
The communication rate of the system I / O bus	345 kbps
System I / O bus terminating resistor	120 Ω
DI - Parameters of binary inputs DC (group A)
Parameters valid for inputs on the terminals	DI0÷DI7
Number of inputs in group	8
Common wire	minus
Input type	Type 1 (IEC)
Galvanic isolation of inputs from internal/peripheral circuits	Yes, all external circuits connected to the module must meet the conditions for SELV circuits
Diagnostics	indication of energized input by LED on module panel
Input voltage for log. 0	0 V DC; -5 V DC min.; +5 V DC max.
Input voltage for log. 1	24 V DC; 15 V DC min.; 30 V DC max.
Input current at log. 1 (typ.)	5 mA typ.
Delay from log. 0 to log. 1	500 μs
Delay from log. 1 to log. 0	500 μs
HSC - Special functions of binary inputs / counters
Unidirectional counter (UP)	2x (DI0); (DI2)
Two unidirectional counters (UP / UPB)	2x (DI0/DI2); (DI2/DI3)
Bidirectional counter (UP/DOWN)	2x (DI0/DI1); (DI2/DI3)
Counter with direction control (CLK/DIR)	2x (DI0/DI1); (DI2/DI3)
Bi-directional counter with reset and intercept (UP / DOWN / CLR / CAP)	1x (DI0/DI1/DI2/DI3)
Counter with direction control with reset and latch (CLK / DIR / CLR / CAP)	1x (DI0/DI1/DI2/DI3)
IRC Basic (V/G)	2x (DI0/DI1); (DI2/DI3)
IRC with Zero and Capture (V / G / NI / MD)	1x (DI0/DI1/DI2/DI3)
Measure the pulse length	4x (DI0,DI1, DI2, DI3)
Period measurement	4x (DI0,DI1, DI2, DI3)
DO - Parameters of binary transistor outputs (group A)
Number of transistor outputs	4
Number of output groups	1
Number of outputs in group	4
Output type	semiconductor output, half-bridge (push-pull)
Galvanic separation from internal circuits	Yes
Diagnostics	indication of energized output by LED on module panel
Switching voltage	12 - 30 V DC
Output resistance	type. 0.3 Ω, max. 0.6 Ω
Switching time	typ. 1,6 μs
Opening time	typ. 0,6 μs
Short circuit protection	Yes
RO - Parameters of binary relay outputs (group A)
Number of relay outputs	7
Number of output groups	3
Output type	electromechanical relay, unprotected output
Contact type	NO - Normally Open
Diagnose	Alarm signaling on panel module
Switching current	2 A max., 100 mA min.
Switching voltage	250 V AC max., 5 V AC min., 30V DC max.
Short-term output overload - inrush	4 A max.
Short-circuit protection	No
AI - Organization of analog inputs
Total number of analog inputs	8
Number of inputs per group	8
Number of analog input groups	1
Organization of analog inputs into groups	8x AI (AI0÷AI7)
Input type	With common clamp
Common wire	Minus
Galvanic separation from internal circuits	Yes, 8 inputs together
Diagnostics	overload signaling in status word
Type of protection	integrated overvoltage protections
External power supply	No
Digital resolution	12 bit
Converter type	Approximation
conversion time	20 μs
AI - Analog Input Ranges (Group A)
Parameters valid for inputs on the terminals	AI0÷AI7
Voltage	0 to 10 V / 2,726 mV
Voltage	0 to 5 V / 2,726 mV
Voltage	0 to 2 V / 610.4 μV
Voltage	0 to 1 V / 610.4 μV
Voltage	0 to 0.5 V / 610.4 μV
Input impedance in the voltage signal range	> 20 kΩ
Voltage input error - max. error at 25 ° C	± 0.3% of full scale
Voltage input error - temperature coefficient	± 0.02% of full scale / K
Voltage input error - non-linearity	± 0.08% of full scale
Voltage input error - repeatability under steady state conditions	0.05% of full scale
Permissible continuous overload - voltage input	-20 V to +30 V
Ccurrent	0 - 20 mA
Current	4-20 mA
Current - resolution 1 LSB	6 μA
Input impedance in the current signal range	100 Ω
Permissible continuous overload - current input, resistance 100 R	± 5 V / 50 mA max
Open input detection	No
Passive sensor	Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor	Ni1000, W100 = 1.617 (-60 to +200 ° C)
Passive sensor	Resistance transmitter 0-1 kOhm
Passive sensor	Resistance transmitter 0-2 kOhm
Passive sensor	Resistance transmitter 0-200 kOhm
Passive sensor	NTC Thermistor 12k / 25 °C (-40 to + 125 °C)
Resistance measurement error - maximum error at 25 ° C	± 0.5% of full scale
AO - Analog output parameters
Number of outputs in group	4
Common wire of group	minus
Galvanic isolation from internal circuits	Yes, along with the entrances
Output type	active voltage output
Converter resolution	12 bit
Power supply
Nominal supply voltage (V)	24 V DC
Supply voltage, tolerances	24 V DC, +25%, -15%, SELV
Supply voltage when backing up with an external battery	27 V DC, +10%, –15%, SELV
Typical power input	8 W
Maximum power input	10 W
Module thermal/power loss	10 W
Maximum current consumption (mA)	500 mA
Galvanic separation of power supply from internal circuits	Yes
Internal protection	Yes, PTC reversible fuse
Size and weight
Weight approx.	300 g
Module width in multiples of M (17.5 mm)	9M
Product dimensions (width x height x depth)	158 x 90 x 62 mm
Operating conditions, product standards
Product standard	ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units
Protection class of electrical object	II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP20
Operating areas	Normal according to ČSN 33 2000-1: 2003 (IEC 364-1: 1992 mod)
Degree of pollution	1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation	II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device	Module on DIN rail
Working position	Vertical
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	-20 °C to + 55 °C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	A, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Emmisions - note	In premises where the use of radio and television receivers can be expected to be used a distance of 10 m from these devices may cause radio interference. In such a case, the user may be required to take appropriate action.
Electromagnetic compatibility / Immunity	min. as required by EN 61131-2: 2007
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Packaginng, transportation, storage
Description	The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Installation
Assembly description	Switchboard mounting
Module operation
Commissioning	The module is operated, set and diagnosed from the MOSAIC programming environment or other parameterization software. The module is ready for operation after connecting the supply voltage and the CIB bus. The HW address is indicated on the label on the module.
Module diagnostics	The basic diagnostic system of the module is a part of its standard software. It operates from module power on and operates independently of the user. Diagnostic error states of the module and connected peripheral modules of the assembly are signaled
Maintenance
Description	The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice	Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!
Warranty
Generally	Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s.
Notice	You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.

HW documentation

PDF

CP-1003 Basic documentation

1.04 MB, (CS, EN)

User manuals

PDF

Foxtrot1 - User's Guide, cze, , TXV00410_01

3.40 MB

PDF

Foxtrot1 - User Manual (en), TXV00410_02

4.30 MB

Files for designers

DWG

CP-1003 technical drawing DWG

168.04 kB

DXF

CP-1003 technical drawing DXF

492.66 kB

MR-0105, MR-0106, MR-0115, fitted with CP-1000, CP-1001, CP-1003, CP-1091 - ...RxD2 RxD2 TxRx2+ Notes: In the CP-1003 - using the DO0 outlet - the D10 terminal must remain free in order to provide safe galvanic isolation of DO0 power o...
CP-1003 - The CP-1003 basic module features eight multi-purpose inputs, each of which can be used either as an analogue input (voltage, current or a passive temperature sensor) or a binary 24 V input, with eight fast binary inputs featuring adjustable decisi...
CH1 communication interface of the CP-1003 and CP-1091, RS485 basic modules - The serial interface of the basic CH1 module CP-1003 and CP-1091 is firmly fitted with the RS-485 interface without galvanic isolation (i.e. the interface signals have galvanic connection with the module power supply, with the CIB interface, th...
Power dissipation of modules for calculation of switchboard heating - ...SCH, 4xAI/DI, 2xDI/230VAC, 2xRO, 2xCIB, 384/192kB CP-1001 6,0 W TXN 110 03 CP-1003, CPU, ETH100/10, 1x RS485, 1x SCH, 8xAI/DI, 8DI/HSC, 4xAO, 8xRO, 4xDO, 2xTCL2 CP-1003 10,0 W...
TCL2 bus – the principles of design and installation - ...Maximum number of modules per bus TCL2 (TCL2A) Maximum number of modules per bus TCL2B (only for CP-1003) Peripheral modules IB, OS, IR, IT, OT, UC 10...
Internal CIB master at the CP-10xx - The CP-10xx Foxtrot basic modules are as a standard fitted with an internal master of CIB (except for CP-1003). Depending on the type of basic module there are several options of power supply to the CIB with an internal master: The basic module...
MR-0161 - CAN interface, with galvanic isolation - ...CP-10x4 CP-10x5 CP-10x6 CP-10x8 CP-1000 CP-1003 CP-1091 Signal Type of signal...
MR-0114 - RS-485 interface, with galvanic isolation - ...CP-10x4 CP-10x5 CP-10x6 CP-10x8 CP-1000 CP-1003 CP-1091 Signal Type of signal Usage...
MR-0104 - the RS-232 interface, with galvanic isolation - ...CP-10x4 CP-10x5 CP-10x6 CP-10x8 CP-1000 CP-1003 CP-1091 Signal Type of signal Usage...
Communication interface CH2, using optional submodules - ...nce with the basic module type: Fig. 1 for the basic modules CP-1000 -1001 and CP-1091 Fig. 2 for the basic module CP-1003 Fig. 3 for the basic modules CP-10x4, CP-10x5. Fig. 4 for the basic modules CP-10x6, CP-10x8. ...
Communication interface CH1 of the basic modules CP-10xx, RS-232 - The serial interface of the basic CH1 module of basic modules (except for the CP-1003) is firmly fitted with the RS-232 interface without galvanic isolation (i.e. the interface signals have galvanic connection with the module power supply by the CI...
Foxtrot basic module power supply - ...also with DI/AI inputs on the basic module (typically connectors on the top side of the module); this does not apply to the CP-1003 - see Chapter 2.7.2 . These circuits are also galvanically connected with the power supply of the system, if the CH2...
First generation Tecomat Foxtrot PLC - ..., Provedení: DIN-RAIL, Interface: Multi, Bus: TC700, Input: true, Output: true, Analog: true, Binary: true ] CP-1003 CP-1003-Základní modul Foxtrot [ AO: 4, DI: 8, DO: 12, Typ: PLC-Foxtrot, Výrobce: Teco, Provedení: DIN-RAIL,...
DMX device control, connection to the CH4 interface of the CP-1000 module - The following example describes the connection of the DMX bus to the CH4 communication interface of the CP-1000 . basic module. In this way it is possible to control up to 512 devices on the DMX bus from the user program of the Foxtrot system. Supp...

No data available.