CP-1013TXN 110 13

CP-1013, CPU+LCD4x20, ETH100/10, 1x RS232, 1x SCH, 8xAI/DI, 4DI/HSC, 4xAO, 7xRO, 4xDO, 2xTCL2

DI 8x DI / AI see AI
8x DI / HSC
DO
AI 8x DI / AI see DI
AO 4x AO
COM 1x ETH 10/100
1 × RS-485
1-3x Serial channel (1x free slot)
2 × TCL2 master
SENSOR
Picture Variant Variant description
CP-1003
CP-1013
The basic module CP-1003 is equipped with eight multi-purpose inputs, each of which can be used either as
  •     analog (voltage, current or for passive temperature sensors) or as
  •     binary 24V, eight fast binary inputs with adjustable decision level
  •     four analog outputs ± 10 V,
  •     eight relay outputs and
  •     four fast transistor outputs with the possibility of direct connection of DC or stepper motors.

The CP-1003 basic module is equipped with a central unit (CPU) of the L series, which is designed for applications with performance requirements.
It contains backed up CMOS RAM for user programs, data, tables, user registers and DataBox, Flash memory for user backup
program, slot for MMC / SD / SDHC memory card, real-time circuit, Ethernet interface, up to 4 serial channels (one with fixed RS-485 interface, another with slot
for the optional submodule) and two TCL2 system interfaces for connecting expansion modules that increase the number of I / O systems.
Order num. TXN 110 13
Teco code TXN 110 13
Categories Foxtrot 1 - Basic modules
Tags Sales and production discontinued
System parameters of the central unit
Row of central unit L
User program memory 384 + 64 kB
Memory for user variables / including RETAIN variables 192 kB/48 kB
Instruction length 2 ÷ 10 bytes
Backup of program source code in PLC Yes, in program backup memory (EEPROM)
On-line program change in PLC Yes, including I / O configuration change
Memory for project archiving - internal 2 MB
DataBox - additional internal data memory 512 kB
Optional memory card slot SD - Card Slot
Cycle time per 1k of logic instructions 0,2 ms
Development environment Mosaic
Programming languages ST, IL, LD, FBD, SFC, CFC
RTC - Real time circuit Yes
RAM and RTC backup 1) without / with backup battery type. 500 hr / typ. 20,000 hours
Integrated Web server Yes
Integrated Datalogger Yes
Access to PLC variables via web API Yes
Notice 1) Applies to the basic module without power supply, the backup circuits are disconnected when the power supply is switched on 2) The serial interface CH1 is permanently equipped with an RS-485 interface. The serial interface type CH2 to CH4 is selectable via interchangeable submodules
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx) 1
Available system modes on ETH and WLAN UNI, PC, PLC, PLD
TCP / IP protocol Yes
UDP protocol Yes
HTTP protocol Yes
Protocol MODBUS/TCP Yes
SMTP protocol Yes
IEC 60870-5-104 protocol Yes
REST API Yes
COM - Serial channels
max. number of optional serial channels in the basic module 4
max. number of expanding serial channels on the TCL2 bus 6
Number of internal RS-232 serial channels 1
Available system modes on CH5-10 UNI, CSJ (CAN)
Modbus RTU / ASCII master protocol Yes
Modbus protocol RTU/ASCII slave Yes
Profibus DP master protocol (<180 kbit/s) Yes, on serial channels supporting PFB mode
COM - System buses
TCL2 - system I/O bus 2x TCL2 master
TCL2 - Range of one branch of the system I/O bus 10 I / O modules + 4 operator panels + 6 serial channels
The communication rate of the system I / O bus 345 kbps
System I / O bus terminating resistor 120 Ω
DI - Parameters of binary inputs DC (group A)
Parameters valid for inputs on the terminals DI0÷DI7
Number of inputs in group 8
Common wire minus
Input type Type 1 (IEC)
Galvanic isolation of inputs from internal/peripheral circuits Yes, all external circuits connected to the module must meet the conditions for SELV circuits
Diagnostics indication of energized input by LED on module panel
Input voltage for log. 0 0 V DC; -5 V DC min.; +5 V DC max.
Input voltage for log. 1 24 V DC; 15 V DC min.; 30 V DC max.
Input current at log. 1 (typ.) 5 mA typ.
Delay from log. 0 to log. 1 500 μs
Delay from log. 1 to log. 0 500 μs
HSC - Special functions of binary inputs / counters
Unidirectional counter (UP) 2x (DI0); (DI2)
Two unidirectional counters (UP / UPB) 2x (DI0/DI2); (DI2/DI3)
Bidirectional counter (UP/DOWN) 2x (DI0/DI1); (DI2/DI3)
Counter with direction control (CLK/DIR) 2x (DI0/DI1); (DI2/DI3)
Bi-directional counter with reset and intercept (UP / DOWN / CLR / CAP) 1x (DI0/DI1/DI2/DI3)
Counter with direction control with reset and latch (CLK / DIR / CLR / CAP) 1x (DI0/DI1/DI2/DI3)
IRC Basic (V/G) 2x (DI0/DI1); (DI2/DI3)
IRC with Zero and Capture (V / G / NI / MD) 1x (DI0/DI1/DI2/DI3)
Measure the pulse length 4x (DI0,DI1, DI2, DI3)
Period measurement 4x (DI0,DI1, DI2, DI3)
DO - Parameters of binary transistor outputs (group A)
Number of transistor outputs 4
Number of output groups 1
Number of outputs in group 4
Output type semiconductor output, half-bridge (push-pull)
Galvanic separation from internal circuits Yes
Diagnostics indication of energized output by LED on module panel
Switching voltage 12 - 30 V DC
Output resistance type. 0.3 Ω, max. 0.6 Ω
Switching time typ. 1,6 μs
Opening time typ. 0,6 μs
Short circuit protection Yes
RO - Parameters of binary relay outputs (group A)
Number of relay outputs 7
Number of output groups 3
Output type electromechanical relay, unprotected output
Contact type NO - Normally Open
Diagnose Alarm signaling on panel module
Switching current 2 A max., 100 mA min.
Switching voltage 250 V AC max., 5 V AC min., 30V DC max.
Short-term output overload - inrush 4 A max.
Short-circuit protection No
AI - Organization of analog inputs
Total number of analog inputs 8
Number of inputs per group 8
Number of analog input groups 1
Organization of analog inputs into groups 8x AI (AI0÷AI7)
Input type With common clamp
Common wire Minus
Galvanic separation from internal circuits Yes, 8 inputs together
Diagnostics overload signaling in status word
Type of protection integrated overvoltage protections
External power supply No
Digital resolution 12 bit
Converter type Approximation
conversion time 20 μs
AI - Analog Input Ranges (Group A)
Parameters valid for inputs on the terminals AI0÷AI7
Voltage 0 to 10 V / 2,726 mV
Voltage 0 to 5 V / 2,726 mV
Voltage 0 to 2 V / 610.4 μV
Voltage 0 to 1 V / 610.4 μV
Voltage 0 to 0.5 V / 610.4 μV
Input impedance in the voltage signal range > 20 kΩ
Voltage input error - max. error at 25 ° C ± 0.3% of full scale
Voltage input error - temperature coefficient ± 0.02% of full scale / K
Voltage input error - non-linearity ± 0.08% of full scale
Voltage input error - repeatability under steady state conditions 0.05% of full scale
Permissible continuous overload - voltage input -20 V to +30 V
Ccurrent 0 - 20 mA
Current 4-20 mA
Current - resolution 1 LSB 6 μA
Input impedance in the current signal range 100 Ω
Permissible continuous overload - current input, resistance 100 R ± 5 V / 50 mA max
Open input detection No
Passive sensor Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor Ni1000, W100 = 1.617 (-60 to +200 ° C)
Passive sensor Resistance transmitter 0-1 kOhm
Passive sensor Resistance transmitter 0-2 kOhm
Passive sensor Resistance transmitter 0-200 kOhm
Passive sensor NTC Thermistor 12k / 25 °C (-40 to + 125 °C)
Resistance measurement error - maximum error at 25 ° C ± 0.5% of full scale
AO - Analog output parameters
Number of outputs in group 4
Common wire of group minus
Galvanic isolation from internal circuits Yes, along with the entrances
Output type active voltage output
Converter resolution 12 bit
Power supply
Nominal supply voltage (V) 24 V DC
Supply voltage, tolerances 24 V DC, +25%, -15%, SELV
Supply voltage when backing up with an external battery 27 V DC, +10%, –15%, SELV
Typical power input 8 W
Maximum power input 10 W
Module thermal/power loss 10 W
Maximum current consumption (mA) 500 mA
Galvanic separation of power supply from internal circuits Yes
Internal protection Yes, PTC reversible fuse
Size and weight
Weight approx. 300 g
Module width in multiples of M (17.5 mm) 9M
Product dimensions (width x height x depth) 158 x 90 x 62 mm
Operating conditions, product standards
Product standard ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units
Protection class of electrical object II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) IP20
Operating areas Normal according to ČSN 33 2000-1: 2003 (IEC 364-1: 1992 mod)
Degree of pollution 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device Module on DIN rail
Working position Vertical
Type of operation (operating frequency) Continuous
Ambient operating temperatures -20 °C to + 55 °C
Operating relative humidity from 10 % up to 95 % without condensation
Operating atmospheric pressure min. 70 kPa (<3,000 m above sea level)
Storage temperatures –25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission A, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Emmisions - note In premises where the use of radio and television receivers can be expected to be used a distance of 10 m from these devices may cause radio interference. In such a case, the user may be required to take appropriate action.
Electromagnetic compatibility / Immunity min. as required by EN 61131-2: 2007
Sinusoidal vibration endurance 10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Packaginng, transportation, storage
Description The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Installation
Assembly description Switchboard mounting
Module operation
Commissioning The module is operated, set and diagnosed from the MOSAIC programming environment or other parameterization software. The module is ready for operation after connecting the supply voltage and the CIB bus. The HW address is indicated on the label on the module.
Module diagnostics The basic diagnostic system of the module is a part of its standard software. It operates from module power on and operates independently of the user. Diagnostic error states of the module and connected peripheral modules of the assembly are signaled
Maintenance
Description The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!
Warranty
Generally Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s.
Notice You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.

HW documentation

PDF

CP-1003 Basic documentation

1.04 MB, (CS, EN)

User manuals

PDF

Foxtrot1 - User's Guide, cze, , TXV00410_01

3.40 MB
PDF

Foxtrot1 - User Manual (en), TXV00410_02

4.30 MB

Files for designers

DWG

CP-1003 technical drawing DWG

168.04 kB
DXF

CP-1003 technical drawing DXF

492.66 kB

No data available.