English
MR-0136, 1x CAN, with its own power supply, galvanic isolationTXN 101 36
MR-0136, 1x CAN, with its own power supply, galvanic isolation
| DI | |
|---|---|
| DO | |
| AI | |
| AO | |
| COM | 1x CAN |
| SENSOR |
| Picture | Variant | Variant description |
|---|---|---|
|
MR-0136, 1x CAN, with its own power supply, galvanic isolation |
Submodule MR-0136 contains 1x CAN interface.
Internal wiring ensures galvanic separation of the interface from the system and power circuits. At the same time, the module contains identification circuits
The user has the option to identify the type of submodule used in the development environment.
Internal wiring ensures galvanic separation of the interface from the system and power circuits. At the same time, the module contains identification circuits
The user has the option to identify the type of submodule used in the development environment.
| Order num. | TXN 101 36 |
|---|---|
| Teco code | TXN 101 36 |
| Categories | Foxtrot 2 - Accessories for basic modules, TC800 - Positioning and counter modules |
| Tags | - |
| COM - Serial channels | |
|---|---|
| Max. baud rate | 1 MBd |
| Number of internal CAN ports | 1 |
| Power supply | |
| Supply voltage, tolerances | The submodule is powered from the power supply the terminal device in which it is installed. |
| Maximum power input | 1,2 W |
| Insulation voltage of galvanic separation | 1 000 VDC |
| Size and weight | |
| Weight approx. | 25 g |
| Product dimensions (width x height x depth) | 15,5 × 42 × 3,5 mm |
| Operating conditions, product standards | |
| Product standard | ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units |
| Protection class of electrical object | III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016) |
| IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) | IP20 |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007) |
| Type of device | Submodule |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | -20 °C to + 55 °C |
| Operating temperature maximum (° C) | +55°C |
| Operating temperature minimum (° C) | -20°C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 °C to +70 °C |
| Installation | |
| Attention! | Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to touch the printed circuit boards directly without protective measures. |
| Connection | |
| Description | Terminal communication interfaces are typically equipped with connectors. The connection of the connectors is specified in the documentation of the respective system where the submodule is used. |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Warning | All conditions of this documentation must be met before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery of which the Foxtrot system is a part complies with the requirements of Directive 89/392 / EEC, in so far as it applies to them. Documentation subject to change. |
EC - Declaration of Conformity
Foxtrot 2 - EC Declaration of conformity (en)
590.59 kB, (EN, RU, DE, UA)
Installation of submodules or micro SD card in CP-xxxx
SLU-302
Installation of submodules or micro SD card in CP-xxxx
CP-2090.11NSNN
TXN 120 90.11NSNN
CP-2090, CPU/1core, 2xETH100/10, ---, 128kB databox, LCD-7mm, CH1-4, 1xCIB, 1x TCL2
CP-2000.11NDNN
TXN 120 00.11NDNN
CP-2000, CPU/1core, 2xETH100/10,---, 128kB databox, LCD 20mm, 1x RS232, CH1-4, 4xAI/DI, 3xDI/230VAC, 2xRO, 2xCIB
CP-2007.11NDNN
TXN 120 07.11NDNN
CP-2007, CPU/1core, 2x ETH100/10, ---, 128 KB databox, LCD-20 mm, CH1-4, 12x AI/DI, 2x AI/AO, 1x DI/230 V AC, 11x RO, 2x AO/PWM, 1xCIB, 1x TCL2
CP-2005.11NSNN
TXN 120 05.11NSNN
CP-2005, CPU/1core, 2xETH100/10, ---, 128kB databox, LCD-7mm, CH1-4, 6x AI/DI, 6x RO, 2x AO, 1xCIB
CP-2080.11NSNN
TXN 120 80.11NSNN
CP-2080, CPU/1core, 2xETH100/10, ---, 128kB databox, LCD-7mm, CH1-4, 4x D I(GO), 6x RO, 2x DO, 1xCIB
CP-2091.11NDNN
TXN 120 91.11NDNN
CP-2091; CPU, 2xETH100/10, 128kB dbox, LCD, 1x RS-485, 1xCIB, CH1-4, 8xAI/DI, 2xAI/DI/AO, 1x DI(230VAC), 2xAO/DO (PWM), 3xDO (PWM), 6xRO, 24VDC/230VAC
CP-2090.11NSNN.50
TXN 120 90.11NSNN.50
CP-2090, Mosaic Single license + iCOOL ready; CPU / 1, 2xETH, 128kB dbox, LCD-7, CH1-4, 1xCIB, 1x TCL2
CP-2000.11NDNN.50
TXN 120 00.11NDNN.50
CP-2000, Mosaic Single lic. + iCOOL ready; CPU/1, 2xETH,---, 128kB dbox, LCD 20, 1x RS232, CH1-4, 4xAI/DI, 3xDI/230VAC, 2xRO, 2xCIB, 1x TCL2
CP-2007.11NDLN.50
TXN 120 07.11NDLN.50
CP-2007, iCOOL ready; CPU/1, 2x ETH, LTE, 128 KB dbox, LCD-20 mm, CH1-4, 12x AI/DI, 2x AI/AO, 1x DI/230 V AC, 11x RO, 2x AO/PWM, 1x CIB, 1x TCL2
CP-2005.11NSNN.50
TXN 120 05.11NSNN.50
CP-2005, Mosaic Single lic. + iCOOL ready; CPU/1, 2xETH, ---, 128kB dbox, LCD-7, CH1-4, 6x AI/DI, 6x RO, 2x AO, 1xCIB, 1x TCL2
No data available.
No data available.