Sales and production discontinued

CP-1005TXN 110 05

CP-1005, CPU, ETH100/10, 1xRS232, 1xSCH, 6xAI/DI, 2xAO, 6xRO 230 V/ 3A, 1xCIB

DI	6x DI/AI
DO	6x RO
AI	6x AI / DI see DI
AO	2x AO
COM
SENSOR

Picture	Variant	Variant description
	CP-1005
	CP-1015

The basic module CP-1005 is equipped with six multi-purpose inputs, each of which can be used either as analog (voltage, current or for passive temperature sensors) or as binary 24V, two analog outputs 10V and 6 relay outputs. The CP-1005 basic module is equipped with a central unit (CPU) of the K series, which is designed for applications with high performance requirements. Includes backed up CMOS RAM for user programs, data, tables, user registers and DataBox, Flash memory for user program backup, MMC / SD / SDHC memory card slot, real time circuit, Ethernet interface, two serial channels (one with fixed interface RS-232, the other with a position for optional submodules), one communication channel with a CIB interface for connecting external peripherals and a TCL2 system interface designed for connecting expansion modules that increase the number of I / O systems.

Order num.	TXN 110 05
Teco code	TXN 110 05
Categories	Foxtrot 1 - Basic modules
Tags	Sales and production discontinued

System parameters of the central unit
Row of central unit	K
User program memory	192 + 64 kB
Memory for user variables / including RETAIN variables	64 kB/32 kB
Instruction length	2 ÷ 10 bytes
Backup of program source code in PLC	Yes, in program backup memory (EEPROM)
On-line program change in PLC	Yes, including I / O configuration change
Memory for project archiving - internal	2 MB
DataBox - additional internal data memory	512 kB
Optional memory card slot	SD - Card Slot
Cycle time per 1k of logic instructions	0,2 ms
Development environment	Mosaic
Programming languages	ST, IL, LD, FBD, SFC, CFC
RTC - Real time circuit	No
RAM and RTC backup 1) without / with backup battery	type. 500 hr / typ. 20,000 hours
Integrated Web server	Yes
Integrated Datalogger	Yes
Access to PLC variables via web API	Yes
Notice	1) Applies to the basic module without power supply, the backup circuits are disconnected when the power supply is switched on 2) The serial interface CH1 is permanently equipped with an RS-485 interface. The serial interface type CH2 to CH4 is selectable via interchangeable submodules
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx)	1
Available system modes on ETH and WLAN	UNI, PC, PLC, PLD
TCP / IP protocol	Yes
UDP protocol	No
HTTP protocol	No
WebSocket protocol	No
Protocol MODBUS/TCP	No
SMTP protocol	No
IEC 60870-5-104 protocol	No
REST API	No
COM - Serial channels
max. number of optional serial channels in the basic module	4
max. number of expanding serial channels on the TCL2 bus	6
Number of internal RS-232 serial channels	1
Available system modes on CH5-10	UNI, CSJ (CAN)
Modbus RTU / ASCII master protocol	No
Modbus protocol RTU/ASCII slave	No
Profibus DP master protocol (<180 kbit/s)	No
COM - System buses
TCL2 - system I/O bus	1x TCL2 master
TCL2 - Range of one branch of the system I/O bus	10 I / O modules + 4 operator panels + 6 serial channels
The communication rate of the system I / O bus	345 kbps
System I / O bus terminating resistor	120 Ω
CIB - Common Installation Bus (R): Installation I/O bus	1x CIB master (100 mA)
CIB - Address range of one branch of the installation bus	32 CFox I/O modules
DI - Parameters of binary inputs DC (group A)
Number of inputs in group	6
Common wire	minus
Input type	Type 1 (IEC)
Galvanic isolation of inputs from internal/peripheral circuits	No
Diagnostics	indication of energized input by LED on module panel
Pulse input overload capacity	max. 30 V (t < 10 ms)
Input voltage for log. 0	0 V DC; -5 V DC min.; +5 V DC max.
Input voltage for log. 1	24 V DC; 15 V DC min.; 30 V DC max.
Input current at log. 1 (typ.)	5 mA typ.
Delay from log. 0 to log. 1	500 μs
Delay from log. 1 to log. 0	500 μs
The minimum width of the captured pulse	500 μs
RO - Parameters of binary relay outputs (group A)
Number of relay outputs	6
Number of output groups	2
Number of outputs in group	3
Diagnose	Alarm signaling on panel module
Switching current	3 A max., 100 mA min.
Switching voltage	250 V AC max., 5 V AC min., 30V DC max.
Short-term output overload - inrush	4 A max.
Current through common clamp	10 A max.
Contact closing time	typ. 10 ms
Contact opening time	typ. 4 ms
Limit values of switched resistive load	max. 3A at 30 V DC or 230 V AC
Switching inductive load limits DC13	max. 3 A at 30 V DC
Switching inductive load limits AC15	max. 3 A at 230 V AC
Switching frequency without load	max. 300 switching / min.
Switching frequency with rated load	max. 20 switching / min.
Mechanical life	min. 5,000,000 cycles
Electrical life at maximum resistive load	min. 100,000 cycles
Electrical life at maximum load inductive DC13	min. 100,000 cycles
Electrical life at maximum load inductive AC15	min. 100,000 cycles
Short-circuit protection	No
Treatment of inductive load	External RC element, varistor (AC), diode (DC)
Insulation voltage between outputs and internal circuits	3750 V AC
Isolation voltage between groups of outputs to each other	3750 V AC
AI - Organization of analog inputs
Total number of analog inputs	6
Number of inputs per group	6
Number of analog input groups	1
Input type	With common clamp
Common wire	Minus
Galvanic separation from internal circuits	No
Diagnostics	overload signaling in status word
Digital resolution	12 bit
Converter type	Approximation
conversion time	20 μs
Analog input error - Temperature coefficient	± 0,03% of full scale
Analog input error - Nonlinearity	± 0.07% of full scale
Analog input error - Steady state repeatability	0.05% of full scale
AI - Analog Input Ranges (Group A)
Voltage	0 to 10 V / 2,726 mV
Voltage	0 to 5 V / 2,726 mV
Voltage	0 to 2 V / 610.4 μV
Voltage	0 to 1 V / 610.4 μV
Voltage	0 to 0.5 V / 610.4 μV
Input impedance in the voltage signal range	> 20 kΩ
Permissible continuous overload - voltage input	-20 V to +30 V
Current	4-20 mA
Permissible continuous overload - current input, resistance 100 R	± 5 V / 50 mA max
Open input detection	No
Passive sensor	Pt100, W100=1,385 (-90 to +400 ° C)
Passive sensor	Pt100, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor	Resistance transmitter 0-1 kOhm
AO - Analog output parameters
Common wire of group	minus
Galvanic isolation from internal circuits	No
Output type	active voltage output
Diagnostics	None
Converter resolution	12 bit
conversion time	10 μs
Analog output error - maximum error at 25 ° C	± 2% of full scale
Analog output error - temperature coefficient	± 0.3% of full scale / K
Analog output error - linearity	± 0.7% of full scale
Analog output error - repeatability under steady state conditions	± 0.5% of full scale
Voltage output - voltage	0 - 10,5 V
Voltage output - Resolution 1 LSB	2,637 mV
Voltage output - maximum output current	10 mA
Power supply
Nominal supply voltage (V)	24 V DC
Supply voltage, tolerances	24 V DC, +25%, -15%, SELV
Supply voltage when backing up with an external battery	27 V DC, +10%, –15%, SELV
Typical power input	5 W
Maximum power input	8 W
Module thermal/power loss	6 W
Maximum current consumption (mA)	400 mA
Galvanic separation of power supply from internal circuits	No
Internal protection	Yes, PTC reversible fuse
Description of power supply	Difference between typical and maximum power input is given by possible load of CIB buses and number of switched outputs and CPU load
CIB branch power supply - parameters of the built-in master	1x 100 mA/ 24 V DC
Size and weight
Weight approx.	200 g
Product dimensions (width x height x depth)	105 x 90 x 62 mm
Module width in multiples of M (17.5 mm)	6M
Module width	105 mm
Module height	92 mm
Module depth	63 mm
Product dimensions (width x height x depth)	105 x 92 x 62 mm
Operating conditions, product standards
Product standard	ČSN EN 61131-2: 2005 (idt IEC61131-2: 2003) - Programmable control units
Protection class of electrical object	II, according to ČSN EN 61140: 2003 (idt IEC 61140: 2001)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP20
Operating areas	Normal, according to ČSN 33 2000-3: 1995 (mod IEC 364-3: 1993)
Degree of pollution	1, according to ČSN EN 60664-1: 2004 (mod IEC 60664-1: 1992)
Overvoltage category installation	II, acc. ČSN EN 60664-1:2004 (mod IEC 606641:1992)
Type of device	Module on DIN rail
Working position	Vertical
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	-20 °C to + 55 °C
Operating temperature maximum (° C)	+55°C
Operating temperature minimum (° C)	-20°C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	A, according to EN 55022: 1999 (mod CISPR22: 1997)
Emmisions - note	In premises where the use of radio and television receivers can be expected to be used a distance of 10 m from these devices may cause radio interference. In such a case, the user may be required to take appropriate action.
Electromagnetic compatibility / Immunity	min. as required by EN 61131-2: 2007
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Packaginng, transportation, storage
Description	The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Description	The module is packed in a paper box according to the internal packing instructions. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with transport labels and other data necessary for transport. Transport from the manufacturer is carried out in the manner agreed upon when ordering. The transport of the product by the customer's own means must be carried out by covered means of transport, in the position specified by the label on the packaging. The box must be stored in such a way that it does not move spontaneously and the outer packaging is not damaged. The product must not be exposed to direct weather conditions during transport and storage. Transport is permitted at temperatures of -25 ° C to +70 ° C, relative humidity of 10% to 95% (non-condensing) and a minimum atmospheric pressure higher than 70 kPa. The product may only be stored in clean rooms free of conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C.
Installation
Assembly description	Switchboard mounting
Assembly description	The basic module is mounted in a vertical position on the U-rail ČSN EN 50022. Installation of the assembly (basic module and possibly peripheral modules) is performed according to TXV 004 10
Exchangeable submodules	The optional MR-01xx submodules with serial channel 2 interface are mounted on the center plate in the CP-10x0 basic module to the position indicated in Fig. 7.1. To add or replace a submodule with a serial channel interface, release the latches on
Module operation
Commissioning	The module is ready for operation after connecting the supply voltage. The MODE button is available on the module panel to display the currently set Ethernet IP address. The parameters of all interfaces are set in the Mosaic development environment.
Module diagnostics	The basic diagnostic system of the module is a part of its standard software. It operates from module power on and operates independently of the user. Diagnostic error states of the module and connected peripheral modules of the assembly are signaled

HW documentation

PDF

CP-1005 Basic documentation

684.58 kB

PDF

CP-1005/1015 User's Guide

5.20 MB

User manuals

PDF

Foxtrot1 - User's Guide, cze, , TXV00410_01

3.40 MB

PDF

Foxtrot1 - User Manual (en), TXV00410_02

4.30 MB

Files for designers

DWG

CP-1005 technical drawing DWG

137.72 kB

DXF

CP-1005 technical drawing DXF

391.35 kB

Connecting two-wire sensors 4 ÷ 20 mA to CP-1005 - ...onnection of two current sensors 4 to 20 mA in a two-wire version. In the same way up to six sensors can be connected to one CP-1005 module. The 24 V power supply can be a separate device, or a common power supply can be used for powering of both the...
CP-1005 - The CP-1005 is the basic module of the Foxtrot control system. A standard configuration of the module is in a 6M housing on a DIN rail (for the housing dimensions, see Chapter 6M housing on a DIN rail ), and it is fitted with six removable termina...
Power dissipation of modules for calculation of switchboard heating - ...2, 1xSCH, 4xDI/AI, 4xDI/HSC, 6xRO 230 V/ 3A,1xCIB CP-1004 5,0 W TXN 110 05 CP-1005, CPU, ETH100/10, 1xRS232, 1xSCH, 6xAI/DI, 2xAO, 6xRO 230 V/ 3A, 1xCIB CP-1005 5,0 W...
Internal CIB master at the CP-10xx - ...CP-1004, CP-1014 100 mA 1 A (module C-BS-0001M ) CP-1005, CP-1015 100 mA 1 A (module C-BS-0001M )...
CP-1015 - The CP-1015 I/O layout (inputs, outputs, power supply, communication interface) is identical with the CP-1005 module. The front panel is different: instead of LED indicators and a small seven-segment indicator there is a larger display with...
Foxtrot basic module power supply - ...CP-1004, CP-1014 8 W 4 W CP-1005, CP-1015 8 W 4 W CP-1006, CP-1016...
The 5A relays, the Foxtrot basic modules and the peripheral CFox modules - These relays are fitted in e.g. the Foxtrot basic modules (CP-1005, CP1006, etc.), the peripheral modules ( C-HM-0308M , C-IR-0202S ) and others (see information on the individual modules ). The parameters of t...
RH and temperature measurement for HVAC applications, the sensor with a 4÷20 mA output - ...uced by Sensorika ) see the following figure below. Fig. 1. An example of wiring the kHCPA converter to the CP-1005 module Notes: The converter is equipped with active current outputs with a common minus terminal....
Foxtrot 2 - Shifts to two! - ...the CP-2005, which with six universal digital / analog inputs, six relay and two analog outputs corresponds to the existing CP-1005 with the aim of replacing it 1: 1. Another variant in this dimension is the CP-2080 with a new combination of four co...
First generation Tecomat Foxtrot PLC - ..., Provedení: DIN-RAIL, Interface: Multi, Bus: TC700, Input: true, Output: true, Analog: true, Binary: true ] CP-1005 CP-1005-Základní modul Foxtrot [ AO: 2, DO: 6, Typ: PLC-Foxtrot, Výrobce: Teco, Provedení: DIN-RAIL, Interfa...
MR-0105, MR-0106, MR-0115, fitted with the CP-10x4, CP-10x5 - Tab. 1: Terminating of the CH2, CH3 and CH4 communication channels for the CP-10x4 , CP-10x5 Terminal block C Terminal MR-0105...
The FOXTROT basic modules - The CP-10xx analogue inputs, ranges, basic information The analogue inputs in basic modules make it possible to connect a number of sensors and measured signals. Each CP-10xx variant is fitted with various numbers of inputs with different para...
Connecting an electricity meter via the TXN 149 01 optical head - The TXN 149 01 optical interface probe (also called an optical head) is designed to read data and to communicate with the electricity meter, the ripple control receiver and other devices. The probe converts optical signals into signals of the serial...

CP1005. cannot connect to it via Ethernet cable - Error A0-03-4301 means that the peripheral module in the CP-1005 unit has stopped communicating with the processor. This can be caused either by a fault on the module or by interference that can enter the system either through the power supply or th...
Technical documentation - ...these control units are not already produced and the original manual for them was only in Czech language. Similar system is CP-1005 and its manual is here (English version). The manual for CP-1006 in the Czech language version is here I am very...