Sales and production discontinued

CP-1972TXN 119 72

CP-1972, CPU, ETH100/10, 1xRS485, 1xSCH, 4xDI, 2xAI/DI, 2xAO/10V, 3xDO PWM/3A, 8xDO/1A 3xDO/3A, 1xCIB, 1x TCL2

DI	4x DI
DO
AI	2x AI
AO
COM	1x ETH 10/100 1x RS-485 3x Serial channel (1x free slot) 1x TCL2 master 1x CIB masterA
SENSOR

Picture	Variant	Variant description
	CP-1972

CP-1972 is a first-generation Foxtrot central module in a customer (OEM) design without its own cover. The modules are equipped with a central unit (CPU) of the L series, which is designed for applications with performance requirements. It includes backed up CMOS RAM for user programs, data, tables, user registers and DataBox, Flash memory for user program backup, MMC / SD / SDHC memory card slot and real time circuit.

Order num.	TXN 119 72
Teco code	TXN 119 72
Categories	Foxtrot 1 - OEM basic modules
Tags	Sales and production discontinued

System parameters of the central unit
Row of central unit	L
User program memory	384 + 64 kB
Memory for user variables / including RETAIN variables	192 kB/48 kB
Instruction length	2 ÷ 10 bytes
Backup of program source code in PLC	Yes, in program backup memory (EEPROM)
On-line program change in PLC	Yes, including I / O configuration change
Memory for project archiving - internal	2 MB
DataBox - additional internal data memory	512 kB
Optional memory card slot	SD - Card Slot
Cycle time per 1k of logic instructions	0,2 ms
Development environment	Mosaic v2018.2 or higher
Programming languages	ST, IL, LD, FBD, SFC, CFC
RTC - Real time circuit	No
RAM and RTC backup 1) without / with backup battery	type. 500 hr / typ. 20,000 hours
Integrated Web server	Yes
Integrated Datalogger	Yes
Access to PLC variables via web API	Yes
Notice	1) Applies to the basic module without power supply, the backup circuits are disconnected when the power supply is switched on 2) The serial interface CH1 is permanently equipped with an RS-485 interface. The serial interface type CH2 to CH4 is selectable via interchangeable submodules
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx)	1
Available system modes on ETH and WLAN	UNI, PC, PLC, PLD
TCP / IP protocol	Yes
UDP protocol	No
HTTPS protocol	No
HTTP protocol	No
WebSocket protocol	No
Protocol MODBUS/TCP	No
SMTP protocol	No
IEC 60870-5-104 protocol	No
REST API	No
COM - Serial channels
max. number of optional serial channels in the basic module	3
max. number of expanding serial channels on the TCL2 bus	6
Number of internal RS-485 serial channels	1
Communication speed of the internal serial channel	optional
Available system modes on CH5-10	UNI, CSJ (CAN)
Modbus RTU / ASCII master protocol	No
Modbus protocol RTU/ASCII slave	No
Profibus DP master protocol (<180 kbit/s)	No
COM - System buses
TCL2 - system I/O bus	1x TCL2 master
TCL2 - Range of one branch of the system I/O bus	10 I / O modules + 4 operator panels + 6 serial channels
The communication rate of the system I / O bus	345 kbps
System I / O bus terminating resistor	120 Ω
CIB - Common Installation Bus (R): Installation I/O bus	1x CIB master (100 mA)
CIB - Address range of one branch of the installation bus	32 CFox I/O modules
DI - Parameters of binary inputs DC (group A)
Number of inputs in group	4
Galvanic isolation of inputs from internal/peripheral circuits	No
Max. measuring voltage on the connected contact	7 V DC
Max. contact current	2 mA
Max. resistance for closed contact, log. 1	< 1 kΩ
Min. resistance for open contact, log. 0	> 2 kΩ
Frequency of measurement	PLC cycle
DO - Parameters of binary transistor outputs (group A)
Number of transistor outputs	8
Number of output groups	2
Number of outputs in group	4
Organization of transistor outputs into groups	4x (DO0-DO3) + 4x (DO4-DO7)
Output type	semiconductor output, half-bridge (push-pull)
Galvanic separation from internal circuits	No
Switching voltage	10 – 32 V DC
Switching current, output load	2.7 A each output permanently, pulse 4 A
Output resistance	type. 0.3 Ω, max. 0.6 Ω
DO - Parameters of binary transistor outputs (group B)
Parameters valid for the terminals	LED0 - LED2
Number of transistor outputs	3
Number of output groups	1
Common group conductor	minus
Output type	NMOS transistor with open collector. (Power load)
Galvanic separation from internal circuits	No
Switching voltage	40 V DC max.
Switching current, output load	3 A max.
Switching time	typ. 25 μs
Opening time	typ. 25 μs
Internal protection	Temperature protection, current limitation
Short-circuit current	typ. 5 A
DO - Parameters of binary transistor outputs (group C)
Number of transistor outputs	2
Number of output groups	1
Organization of transistor outputs into groups	2x (DO8-DO9)
Common group conductor	minus
Output type	Open-collector PMOS transistor. (Load on GND)
Galvanic separation from internal circuits	No
Switching voltage	6 - 36 V DC
Switching current, output load	each output permanently 3.7 A
Output resistance	typ. 90 mΩ
Switching time	typ. 30 μs
Opening time	typ. 500 μs
Internal protection	Temperature protection, current limitation
Residual current	max. 5 μA
AI - Organization of analog inputs
Total number of analog inputs	2
Input type	Current input
Common wire	Minus
Galvanic separation from internal circuits	No
Diagnostics	overload signaling in status word
Digital resolution	12 bit
Converter type	Approximation
conversion time	20 μs
Repeat time of sample	80 μs typ.
Filtration	comb filter, 32 samples
AI - Analog Input Ranges (Group A)
Ccurrent	0 to 20 mA / 0.3906 μA
Input impedance in the current signal range	100 Ω
Current input error - maximum error at 25 ° C	±0.3% of full scale
Error current input - temperature coefficient	± 0.02% of full scale / K
Error current input - nonlinearity	± 0.08% of full scale
Error current input - repeatability at steady-state conditions	0.05% of full scale
Output for supplying measuring current loops
Output voltage	24 V ± 10%
Output current	45 mA
Endurance against short circuit	No
Short circuit protection	No
AO - Analog output parameters
Common wire of group	minus
Converter resolution	12 bit
Analog output error - maximum error at 25 ° C	± 0.2% of full scale
Analog output error - temperature coefficient	± 0.3% of full scale / K
Analog output error - linearity	± 0.7% of full scale
Analog output error - repeatability under steady state conditions	± 0.5% of full scale
Voltage output - voltage	0 - 10,5 V
Voltage output - Resolution 1 LSB	2,589 mV
Voltage output - maximum output current	10 mA
Power supply
Nominal supply voltage (V)	12 V DC
Supply voltage, tolerances	12/24 V DC, +25%, -15%, SELV
Maximum power input	5 W
Maximum current consumption (mA)	300 mA
Description of power supply	The difference between the typical and the maximum power is given by the possible load on the CIB buses
CIB branch power supply - parameters of the built-in master	1x 100 mA/ 24 V DC
Size and weight
Weight approx.	200 g
Product dimensions (width x height x depth)	120 x 80 x 50 mm
Product dimensions (width x height x depth)	120 x 80 x 50 mm
Operating conditions, product standards
Product standard	ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units
Protection class of electrical object	II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP00
Operating areas	Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Degree of pollution	1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation	II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device	For spacers
Working position	Vertical
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	-20 °C to + 55 °C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	B, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Emmisions - note	In premises where the use of radio and television receivers can be expected to be used a distance of 10 m from these devices may cause radio interference. In such a case, the user may be required to take appropriate action.
Electromagnetic compatibility / Immunity	min. as required by EN 61131-2: 2007
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)