APPC-17EL5017100

APPC-17EL, 17.3 "touch panel, 1920x1080, Android 8.1, 250 cd / m2, USB, LAN, WIFI, BT, VESA 100, front camera

DI
DO
AI
AO
COM 1x ETH
1x WiFi
1x HDMI
1x USB-A, 1x Micro USB
1x Audio out (3,5 mm)
SENSOR
Picture Variant Variant description
APPC-17EL
The APPC-17EL is an Android panel computer with a 17.3” touch screen. The APPC-17EL comes with Android 8.1. This device can be connected via RJ45 LAN, WiFi and Bluetooth. This touch screen Android SOC has a projected capacitive touch screen and a plastic cover. This entry-level display is part of the EL range and comes standard with a 2MP camera, mini USB, USB and HDMI I/O ports. Optional accessories are a barcode scanner (USB), an NFC module (USB) or VESA mounting brackets.
Order num. 1060401050
Teco code 5017100
Categories HMI - Graphic touch panels
Tags -
System parameters of the central unit
CPU Cortex A17, Quad Core, RK3288
GPU MALI T764 / 3D Graphic Engine (4K)
System Memory 2 GB DDR3 SDRAM
Internal Storage 16 GB eMMC Flash
Operating system Android 8.1
Optional memory card slot SD - Card Slot
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx) 1
LAN interface 1x 10/100/1000 Mbps
WiFi interface 802.11 a/b/g/n/ac
COM - USB
USB devices interface 1x mini-USB
USB host interface 2x USB-A
COM - Bluetooth
Bluetooth version implemented BT 4.0
Display parameters
Characteristics TFT LCD IPS
Diagonal 17.3”
Resolution 1920 x 1080 pixels
Backlight LED
Touch panel 10 point capacitive
Brightness 250 cd/m2
Contrast Ratio 800:1
Aspect Ratio 16:9
Video, Audio
Video Support 3GP,ASF,AVI,DAT,FLV,MKV,MOV,VOB,WMV,MP4,MPG,RM,TS
Audio Support AAC,ASF,MP2,OGG,WAV,WMA
Microphone Yes
Audio Jack Output 3.5mm Yes
Loudspeakers 2 x 2 W
Video Out HDMI
Integrated camera 2 MP front camera
Power supply
Nominal supply voltage (V) 12 V DC
Typical power input 10 W
Maximum power input 20 W
Maximum current consumption (mA) 3,125 A
PoE - Power over Ethernet IEEE 802.3at (PoE+)
Size and weight
Weight approx. 1600 g
Product dimensions (width x height x depth) 418 x 263 x 26 mm
Operating conditions, product standards
Operating areas Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Ambient operating temperatures 0 °C to +40 °C
Operating relative humidity from 10 % up to 95 % without condensation
Storage temperatures –10 °C až +55 °C
Packaginng, transportation, storage
Description The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Installation
Assembly description Indoor wall mounting
VESA mounting VESA 100
Connection
Ethernet RJ-45
Maintenance
Instructions See the manual
Warranty
Generally Warranty and complaint conditions are governed by the Teco a.s. Business Terms and Conditions. and relevant subcontractor terms and conditions.
Notice You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.

HW documentation

PDF

APPC-17EL/APPC-17EL_V01_Drawing

581.05 kB
PDF

APPC-17EL basic documentation

1.36 MB, (EN)

No data available.

No data available.