APPC-17EL5017100
APPC-17EL, 17.3 "touch panel, 1920x1080, Android 8.1, 250 cd / m2, USB, LAN, WIFI, BT, VESA 100, front camera
DI | |
---|---|
DO | |
AI | |
AO | |
COM | 1x ETH 1x WiFi 1x HDMI 1x USB-A, 1x Micro USB 1x Audio out (3,5 mm) |
SENSOR |
Picture | Variant | Variant description |
---|---|---|
APPC-17EL |
The APPC-17EL is an Android panel computer with a 17.3” touch screen. The APPC-17EL comes with Android 8.1. This device can be connected via RJ45 LAN, WiFi and Bluetooth. This touch screen Android SOC has a projected capacitive touch screen and a plastic cover. This entry-level display is part of the EL range and comes standard with a 2MP camera, mini USB, USB and HDMI I/O ports. Optional accessories are a barcode scanner (USB), an NFC module (USB) or VESA mounting brackets.
Order num. | 1060401050 |
---|---|
Teco code | 5017100 |
Categories | HMI - Graphic touch panels |
Tags | - |
System parameters of the central unit | |
---|---|
CPU | Cortex A17, Quad Core, RK3288 |
GPU | MALI T764 / 3D Graphic Engine (4K) |
System Memory | 2 GB DDR3 SDRAM |
Internal Storage | 16 GB eMMC Flash |
Operating system | Android 8.1 |
Optional memory card slot | SD - Card Slot |
COM - Communication - IP/Ethernet | |
Ethernet 10/100 Mb (ETHx) | 1 |
LAN interface | 1x 10/100/1000 Mbps |
WiFi interface | 802.11 a/b/g/n/ac |
COM - USB | |
USB devices interface | 1x mini-USB |
USB host interface | 2x USB-A |
COM - Bluetooth | |
Bluetooth version implemented | BT 4.0 |
Display parameters | |
Characteristics | TFT LCD IPS |
Diagonal | 17.3” |
Resolution | 1920 x 1080 pixels |
Backlight | LED |
Touch panel | 10 point capacitive |
Brightness | 250 cd/m2 |
Contrast Ratio | 800:1 |
Aspect Ratio | 16:9 |
Video, Audio | |
Video Support | 3GP,ASF,AVI,DAT,FLV,MKV,MOV,VOB,WMV,MP4,MPG,RM,TS |
Audio Support | AAC,ASF,MP2,OGG,WAV,WMA |
Microphone | Yes |
Audio Jack Output 3.5mm | Yes |
Loudspeakers | 2 x 2 W |
Video Out | HDMI |
Integrated camera | 2 MP front camera |
Power supply | |
Nominal supply voltage (V) | 12 V DC |
Typical power input | 10 W |
Maximum power input | 20 W |
Maximum current consumption (mA) | 3,125 A |
PoE - Power over Ethernet | IEEE 802.3at (PoE+) |
Size and weight | |
Weight approx. | 1600 g |
Product dimensions (width x height x depth) | 418 x 263 x 26 mm |
Operating conditions, product standards | |
Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
Ambient operating temperatures | 0 °C to +40 °C |
Operating relative humidity | from 10 % up to 95 % without condensation |
Storage temperatures | –10 °C až +55 °C |
Packaginng, transportation, storage | |
Description | The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C |
Installation | |
Assembly description | Indoor wall mounting |
VESA mounting | VESA 100 |
Connection | |
Ethernet | RJ-45 |
Maintenance | |
Instructions | See the manual |
Warranty | |
Generally | Warranty and complaint conditions are governed by the Teco a.s. Business Terms and Conditions. and relevant subcontractor terms and conditions. |
Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
HW documentation
APPC-17EL/APPC-17EL_V01_Drawing
581.05 kB
APPC-17EL basic documentation
1.36 MB, (EN)
No data available.
No data available.