English
DTNVE 1/CIBDTNVE 1/CIB
DTNVE 1/CIB surge supressor for 1xCIB, for flush mounting
| DI | |
|---|---|
| DO | |
| AI | |
| AO | |
| COM | |
| SENSOR |
| Picture | Variant | Variant description |
|---|---|---|
|
DTNVE 1/CIB |
DTNVE 1 / CIB Surge protection for CIB bus, in the installation box
DTNVEM 1 / CIB overvoltage protection is a basic element for protecting your own CIB bus. It only protects against surges that can enter the CIB installation itself. It does not replace the protection of the entire control system.
DTNVEM 1 / CIB is a surge protection device (SPD) according to ČSN EN 61643-21 (categories A2, B2, C2, C3, D1) designed to protect the CIB bus against lightning currents and overvoltages. The recommended location is at the entrance of the line from the outdoor environment to the building, further at the interfaces of other LPZ (according to ČSN EN 62305) and near the protected equipment, so that the cable length between the overvoltage protection device and the protected equipment is a maximum of 10 m.
DTNVEM 1 / CIB overvoltage protection is a basic element for protecting your own CIB bus. It only protects against surges that can enter the CIB installation itself. It does not replace the protection of the entire control system.
DTNVEM 1 / CIB is a surge protection device (SPD) according to ČSN EN 61643-21 (categories A2, B2, C2, C3, D1) designed to protect the CIB bus against lightning currents and overvoltages. The recommended location is at the entrance of the line from the outdoor environment to the building, further at the interfaces of other LPZ (according to ČSN EN 62305) and near the protected equipment, so that the cable length between the overvoltage protection device and the protected equipment is a maximum of 10 m.
| Order num. | 8030104414 |
|---|---|
| Teco code | DTNVE 1/CIB |
| Categories | CFox - System Modules |
| Tags | - |
| Properties of surge protectors | |
|---|---|
| Rated voltage | 24V DC |
| Highest continuous operating voltage Uc (DC) | 36 V DC |
| Size and weight | |
| Product dimensions (width x height x depth) | 35 x 92 x 40 mm |
Files for designers
Foxtrot 2 - library of elements in DXF and DWG formats, v. 2024/01.
20.49 MB
Foxtrot 2 - element library for SchemataCAD, v. 2024/01
6.79 MB
- SPD module of Type 2 DTNVEM 1/CIB and DTNVE 1/CIB - ...nly differ in their mechanical design: The DTNVEM 1/CIB the 1M version on a DIN rail with screw terminals. The DTNVE 1/CIB built-in design (e.g. in a recessed flush box) with insulated conductors outlets about 10cm long. ...
- CIB surge protection - ...available: SPD module Type 1+2+3 (the lightning surge suppressor) and Type 2+3 SPD module of Type 2 DTNVEM 1/CIB and DTNVE 1/CIB ...
- CIB power supply – principles, optimization - The number of peripheral modules on the CIB (a branch). The maximum number of CFox peripheral modules in one CIB is 32. This number must NEVER be exceeded. In the case of modules supplied from the CIB (e.g. the C-HM-1113M ) with a high...
No data available.