CP-8001TXN 180 01

CP-8001; CPU/1core, 2x ETH100/10, 2xUSB, 2x Slot for CH1-4, 128 kB Databox

DI 16x DI
DO
AI
AO
COM 2x ETH 10/100
4x Serial channel (2x free slot for MR-013x submodules)
1x USB device
1x USB host
1x TCL3 master (system bus)
SENSOR
Picture Variant Variant description
CP-8001
CP-8001 is a central module for the TC800 series containing 2x ETH100/10, 2x USB, 2x slot for serial channel submodules CH1-4, also 128 KB memory for DataBox, single-core processor ARMv7 792 MHz, no internal WLAN1 interface, integrated display size 13 x 7 mm.
Order num. TXN 180 01
Teco code TXN 180 01
Categories TC800 - Central modules
Tags -
System parameters of the central unit
Row of central unit I
User program memory 1 MB
Memory for user variables / including RETAIN variables 320 kB/48 kB
Instruction length 4 Byte
Backup of program source code in PLC Yes, optional in Mosaic
On-line program change in PLC Yes, including I / O configuration change
DataBox - additional internal data memory 128/257 kB, optional
File system - Internal Drive in PLC 128 MB, journaling file system
File system - RAM disk PLC 16 MB
File System - USB Flash Drive Supported
File system - Micro SD card supported (except for variants with WLAN1)
Optional memory card slot microSD - Card Slot (<= 1TB)
Cycle time per 1k of logic instructions 0,036 ms
Cycle time for 1k integer operations 0,044 ms
Cycle time for 1k floating point operations 0,043 ms
Development environment Mosaic v2018.2 or higher
Programming languages ST, IL, LD, FBD, SFC, CFC
RTC - Real time circuit No
RTC - Backup time typ. 500 hours
Integrated Web server Yes
Integrated Datalogger Yes
Access to PLC variables via web API Yes
COM - Communication - IP/Ethernet
Ethernet 10/100 Mb (ETHx) 2
WLAN2 (external via USB host, optional) 1
Available system modes on ETH and WLAN UNI, PC, PLC, PLD
TCP / IP protocol Yes
UDP protocol Yes
HTTPS protocol Yes
HTTP protocol Yes
WebSocket protocol Yes
Protocol MODBUS/TCP Yes
SMTP protocol Yes
IEC 60870-5-104 protocol Yes
REST API Yes
COM - USB
USB devices interface 1x micro-USB
USB host interface 1x USB-A
Available system modes on USB PC
COM - Serial channels
max. number of serial channels that can be serviced at one time 10
max. number of optional serial channels in the basic module 4
number of slots for optional submodules with interface (MR-013x) 2
max. number of expanding serial channels on the TCL2 bus 6
Communication options on submodules MR-0135 PFB - Profibus DP (master)
Available system modes on CH5-10 UNI, CSJ (CAN)
Modbus RTU / ASCII master protocol Yes
Modbus protocol RTU/ASCII slave Yes
COM - System buses
TCL3 - system I/O bus 1x TCL3 master
TCL3 - Range of one branch of the system I/O bus max. 64 I/O modules
The communication rate of the system I / O bus 5 Mbps
System I / O bus terminating resistor 120 Ω
ITCL - internal system bus Yes
ITCL - number of exchangeable submodules 2
ETCL - external system bus 1 (ETH1 or ETH2)
Power supply
Nominal supply voltage (V) 24 V DC; Power supply from the system bus
Supply voltage, tolerances 20 - 30 V DC
Module thermal/power loss 1 W
Maximum current consumption (mA) < 50 mA
Galvanic separation of power supply from internal circuits Yes
Size and weight
Weight approx. 140 g
Product dimensions (width x height x depth) 24 x 118 x 97 mm
Operating conditions, product standards
Product standard ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units
Protection class of electrical object II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) IP20
Operating areas Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Degree of pollution 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device Built-in
Working position Vertical
Type of operation (operating frequency) Continuous
Ambient operating temperatures -20 °C to + 55 °C
Operating relative humidity from 10 % up to 95 % without condensation
Operating atmospheric pressure min. 70 kPa (<3,000 m above sea level)
Storage temperatures –25 °C to +70 °C
Storage relative humidity Max. 80% without vapor condensation
Storage environment Dry, clean areas without conductive dust, aggressive gases or acid vapors for a period not exceeding the warranty period.
Transport temperatures -25°C to -70°C
Transport environment Covered means of transport, transport packaging must not be exposed to the effects of rain and snow
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission A, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Emmisions - note In premises where the use of radio and television receivers can be expected to be used a distance of 10 m from these devices may cause radio interference. In such a case, the user may be required to take appropriate action.
Electromagnetic compatibility / Immunity min. as required by EN 61131-2: 2007
Sinusoidal vibration endurance 10 Hz to 57 Hz amplitude 0.075 mm, 57 Hz to 150 Hz acceleration 1 G, according to Fc according to ČSN EN 60068-2-6 ed.2:2008 (idt IEC 60068-2-6:2007), 10 cycles in each axis .
Packaginng, transportation, storage
Description The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Installation
Assembly description The installation of the TC800 system module is carried out by sliding it perpendicularly onto the DIN rail ČSN EN 50022 with busbar and locking latch in the lower part of the module. A more detailed description and mechanical drawings with dimensions are given in the documentation TXV 004 72.
Module operation
Module configuration The module is operated, set up and diagnosed from the Mosaic development environment.
Commissioning On the module, the DIP switch in the left part of the case sets a unique address within one frame. The module is fully ready for operation after inserting it into the frame and turning on the power supply.
Module diagnostics The basic diagnostic system of the module is part of its standard software. It has been in operation since the module power was turned on and works independently of the user. Diagnosed error states of the module and connected peripheral modules of the assembly are signaled in the status word of the module and on the module panel
Maintenance
Description The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!
Warranty
Generally Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s.
Notice You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.

HW documentation

PDF

CP-8001 - Basic documentation

1.70 MB, (EN)

Files for designers

ZIP

TC800 - library of elements in DXF and DWG formats, v. 2024/01

487.65 kB
KNI

TC800 - element library for SchemataCAD, v. 2024/01

116.21 kB

EC - Declaration of Conformity

PDF

TC800 - CE declaration of conformity (cs)

292.20 kB
PDF

TC800 - CE Declaration of Conformity (en)

709.29 kB
  • Central module CP-8001 - Central unit in module CP-8001 has series I. These units have the following features: •    1 MB of memory for user programs •    128 MB internal file system for project archiving, among others (chapter...
  • Communication interface submodule connector on the CP-8001 module - ...internal bus of the base module. Modules MR-0130 to MR-0134 complement the serial communication channels on the basic module CP-8001.   Optional submodules to the basic module, e.g.   CP-8001 they mount on the right flank in the...
  • TC800 power supply sizing calculation and heat loss - ...            CP-8001 TXN 180 01 2 2,0 W 0,0 W 2,0 W   &n...
  • TC800 CENTRAL MODULES - ...e central module can be equipped with two submodules, eg with serial channels or other buses. The central unit in the CP-8001 module is described in the  following article . Fig. 1. TC800 central module...
  • TECOMAT TC800 SYSTEM FEATURES - ...TCL2, CIB, etc.) is given in the article  CENTRAL MODULES TC800 . Basic overview of TC800 modules Central module CP-8001 Power supply modules PW-8901 and PW-8902 Binary input module IB-8302 Binary input module IB-8310...

No data available.