English
APPC-7XPL-R235007550
APPC-7XPL R23, 7 " Touch panel, 1024 x 600, Android 12, 240 cd / m2, USB, LAN, WIFI, VESA unique pattern, pogo connector, Black Plastic, PoE
| DI | |
|---|---|
| DO | |
| AI | |
| AO | |
| COM | 1x ETH 1x WiFi 1x HDMI 1x USB-A, 1x Micro USB 1x Audio out (3,5 mm) |
| SENSOR |
| Picture | Variant | Variant description |
|---|---|---|
|
APPC-7XPL-R23 |
- 2 sided LED Bar for Room Signage (RGB)
- With Power over Ethernet
- Cortex A53, Octa Core, RK3368H
- Robust eMMC Flash Memory
- RJ45 LAN, WiFi
| Order num. | 1060401072 |
|---|---|
| Teco code | 5007550 |
| Categories | HMI - Graphic touch panels |
| Tags | - |
| System parameters of the central unit | |
|---|---|
| CPU | Cortex A53, Octa Core, RK3368H |
| GPU | Embedded 3D GPU - GC6110 (4k) |
| System Memory | 2 GB DDR3 SDRAM |
| Internal Storage | 16 GB eMMC Flash |
| Operating system | Android 12 |
| Optional memory card slot | miniSD-Card Slot |
| COM - Communication - IP/Ethernet | |
| Ethernet 10/100 Mb (ETHx) | 1 |
| WLAN1 (internal, optional) | 1 |
| LAN interface | 1x 10/100/1000 Mbps |
| WiFi interface | 802.11 a/b/g/n/ac |
| COM - USB | |
| USB devices interface | 1x micro-USB |
| USB host interface | 1x USB-A |
| COM - Bluetooth | |
| Bluetooth version implemented | BT 4.2 |
| Display parameters | |
| Characteristics | TFT LCD IPS |
| Diagonal | 7" |
| Resolution | 1024 x 600 |
| Backlight | LED |
| Touch panel | 10 point capacitive |
| Brightness | 240 cd/m2 |
| Contrast Ratio | 600:1 |
| Aspect Ratio | 17:10 |
| Video, Audio | |
| Video Support | 3GP,ASF,AVI,DAT,FLV,MKV,MOV,VOB,WMV,MP4,MPG,RM,TS |
| Audio Support | AAC,ASF,MP2,OGG,WAV,WMA |
| Microphone | Yes |
| Audio Jack Output 3.5mm | Yes |
| Loudspeakers | 2 x 2 W |
| Power supply | |
| Nominal supply voltage (V) | 12 V DC |
| PoE - Power over Ethernet | IEEE 802.3at (PoE+) |
| Size and weight | |
| Weight approx. | 500 g |
| Product dimensions (width x height x depth) | 189 x 120 x 26 mm |
| Operating conditions, product standards | |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Ambient operating temperatures | 0 °C to +40 °C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Storage temperatures | –10 °C až +55 °C |
| Packaginng, transportation, storage | |
| Description | The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C |
| Installation | |
| Assembly description | Indoor wall mounting |
| VESA mounting | VESA 75 |
| Connection | |
| Ethernet | RJ-45 |
| Maintenance | |
| Instructions | See the manual |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Teco a.s. Business Terms and Conditions. and relevant subcontractor terms and conditions. |
| Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
HW documentation
APPC-7XPL_U02_Manual en
3.47 MB
APPC-7XPL_V01_Drawing
2.66 MB
APPC-7XPL - Basic documentation
1.02 MB, (EN)
SGA25E12-P1J
SGA25E12-P1J
SGA25E12-P1J; Switch-mode power supply; 12VDC; 2.08 A; connector 5.5/2.1; 25W; 90÷264VAC
No data available.
No data available.