English
R-DL-0203L-A, control 3x DALITXN 142 22.A
R-DL-0203L-A; RFox2, 2x AI / DI, 3x DALI (broadcast), type A radio
| DI | 2 AI/DI |
|---|---|
| DO | 3x PWM (alternation of DALI outputs) |
| AI | 2 AI / DI see DI |
| AO | |
| COM | |
| SENSOR |
| Picture | Variant | Variant description |
|---|---|---|
|
R-DL-0203L-A, control 3x DALI |
R-DL-0203L-A; RFox2, 2x AI / DI, 3x DALI (broadcast), type A radio
| Order num. | TXN 142 22.A |
|---|---|
| Teco code | TXN 142 22.A |
| Categories | RFox2 - DIN Rail Modules |
| Tags | - |
| COM - Serial channels | |
|---|---|
| Communication interface DALI | 3x DALI master |
| The scope of each DALI line | 4 addresses / substations |
| COM - Wireless network | |
| RFox2 wireless network | RFox2 Slave |
| Communication frequency band | 868,1 MHz |
| Transmission power | +14 dBm |
| Input sensitivity | –108 dBm |
| Modulation type | 2-GFSK |
| Communication speed | 50 kbps |
| DI - Parameters of binary inputs DC (group A) | |
| Parameters valid for inputs on the terminals | AI/DI1, AI/DI2 |
| Number of inputs in group | 2 |
| Common wire | minus |
| Combined input type | DI/AI Active, for sensing potential-free contacts and measuring resistance sensors |
| Galvanic isolation of inputs from internal/peripheral circuits | No |
| Input current at log. 1 (typ.) | 0,5 mA typ. |
| DO - Parameters of binary transistor outputs (group A) | |
| Parameters valid for the terminals | DA-. DA1+, DA2+ DA3+, (A2, A3, A4, A5) |
| Number of transistor outputs | 3 |
| Number of output groups | 1 |
| Number of outputs in group | 3 |
| Common group conductor | minus |
| Output type | Low-side |
| Galvanic separation from internal circuits | No |
| Resting output level | 24 V DC + -5% |
| Switching current, output load | 100 mA max. |
| Special functions (A) | PWM |
| Special function (B) | DALI, bidirectional master |
| Operating frequency | 1 Hz - 1 kHz |
| Alternation settings | 0 – 100 % |
| Power supply | |
| Supply voltage, tolerances | 90 – 270 V AC |
| Input voltage frequency | 50-60 Hz |
| Maximum power input | 2 W |
| Galvanic separation of power supply from internal circuits | No |
| Insulation voltage of galvanic separation | 3 000 VDC |
| Internal protection | Yes, non-refundable |
| Size and weight | |
| Weight approx. | 75 g |
| Product dimensions (width x height x depth) | 35 × 92 × 40 mm |
| Operating conditions, product standards | |
| Product standard | ČSN EN 60730-1 ed.4 :2017 (EN 60730-1:2016) -Automatic electronic control device (for household and similar purposes) |
| Protection class of electrical object | II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016) |
| IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) | IP20 |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007) |
| Type of device | Module on DIN rail |
| Working position | Any |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | -20 °C to + 55 °C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 °C to +70 °C |
| Electromagnetic compatibility, Mechanical endurance | |
| Electromagnetic compatibility / Emission | B, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015) |
| Electromagnetic compatibility / Immunity | min. according to ČSN EN 60730-1 ed.3: 2012 |
| Sinusoidal vibration endurance | 10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.) |
| Packaginng, transportation, storage | |
| Description | The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C |
| Connection | |
| Connection description | An example of module connection is shown in the following figure. Any type designed for the 868 MHz band with an SMA connector (pin) can be used as an antenna. |
| Warnings / Cautions | CAUTION: The device contains parts with dangerous voltage, disconnect the relevant circuits or switch off the power supply before removing the covers or handling the wiring! |
| Module operation | |
| Commissioning | The module is operated in the RFox2 radio network as a peripheral module, the settings are made in the Mosaic programming environment project manager, see the TXV 003 93 manual with the description of RFox2Lib. |
| Module diagnostics | The basic diagnostics is performed internally and the result is available in the relevant registers of the Mosaic environment. |
| Maintenance | |
| Description | The module does not require any maintenance under general installation conditions. |
| Warning | Because the module contains semiconductor components, it is necessary to follow the principles for working with components sensitive to electrostatic charges during handling. Repairs are performed exclusively by the manufacturer's service center or the manufacturer's authorized service. |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
HW documentation
R-DL-0203L-A - Basic documentation
173.13 kB
Files for designers
Foxtrot 2 - library of elements in DXF and DWG formats, v. 2024/01.
20.49 MB
Foxtrot 2 - element library for SchemataCAD, v. 2024/01
6.79 MB
No data available.
No data available.