C-RQ-0600R-RHT-LOGUS blackTXN 133 61.02LTPM

C-RQ-0600R-RHT-LOGUS black; CIB, Interior humidity and temperature sensor, 2x AI / DI

DI	2x AI/DI
DO
AI	2x AI / DI see DI
AO
COM	1x CIB slave
SENSOR	1x Temperature 1x Relative humidity

Picture	Variant	Variant description
	C-RQ-0600R-RHT-LOGUS, white, TBR	Color: White
	C-RQ-0600R-RHT-LOGUS, ivory, TMF	Color: Ivory
	C-RQ-0600R-RHT-LOGUS, ice, TGE	Color: Ice
	C-RQ-0600R-RHT-LOGUS, Pearl, TPE	Color: Pearl
	C-RQ-0600R-RHT-LOGUS, aluminum, TAL	Color: Aluminum
	C-RQ-0600R-RHT-LOGUS, gray, TIS	Color: Grey
	C-RQ-0600R-RHT-LOGUS black	Color: Black
	C-RQ-0600R-RHT-LOGUS gold	Color: Gold

C-RQ-0600R-RHT-LOGUS; CIB, Indoor humidity and temperature sensor, 2x AI / DI, white

Order num.	TXN 133 61.02LTPM
Teco code	TXN 133 61.02LTPM
Categories	CFox - LOGUS, Covers and devices
Tags	-

COM - System buses
CIB - Common Installation Bus (R): Installation I/O bus	1x CIB slave
AI - Analog Input Ranges (Group A)
Parameters valid for inputs on the terminals	DI/AI1, DI/AI2
Passive sensor	Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor	Ni1000, W100 = 1.617 (-60 to +200 ° C)
Passive sensor	Resistance transmitter 0-160 kOhm
Passive sensor	KTY81-121; PTC thermistor (-55 to + 125 °C)
Passive sensor	NTC Thermistor 12k / 25 °C (-40 to + 125 °C)
DI: Voltage-free contact	0 when> 1.5 kOhm, 1 when <0.5 kOhm
DI: Balanced resistance input	2x 1k1 (tamper/0/1/tamper)
Resistance measurement error - maximum error at 25 ° C	± 0.5% of full scale
Parameter des Temperatursensors
Temperature - Sensor type	SHT31
Temperature - Measurement range	–40 °C ÷ +125 °C
Temperature - Resolution	0,1 °C
Temperature - Measurement accuracy	typ. ±0,3 °C
Temperature - Settling time	120 min.
Humidity sensor parameters
Relative humidity - Sensor type	SHT31
Relative humidity - Measurement range	0 ÷ 100 %RH
Relative humidity - Resolution	1 % RH
Relative humidity - Measurement accuracy	typ. ±2 %RH
Power supply
Supply voltage, tolerances	24/27 V DC from CIB bus
Power supply from CIB - typical current consumption (mA)	15 mA
Power supply from CIB - maximum current consumption (mA)	20 mA
Internal protection	Yes
Size and weight
Weight approx.	75 g
Product dimensions (width x height x depth)	55 × 27 × 20 mm
Operating conditions, product standards
Product standard	ČSN EN 60730-1 ed. 3:2012 (mod IEC 60730-1:2010)
Protection class of electrical object	III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP10B
Operating areas	Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Degree of pollution	1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation	II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device	In the installation box on the wall
Working position	Any
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	0 °C to + 55 °C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	ČSN EN 55022 ed2:2007 (mod CISPR22:2005)
Electromagnetic compatibility / Immunity	min. according to ČSN EN 60730-1 ed.3: 2012
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Packaginng, transportation, storage
Description	The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C
Installation
Assembly description	The module C-DM-0001B-SL is mounted in arbitrary positioninto instalation box under a lid or under device located in box.
Connection
Connection description	An example of module connection is shown in the following figure.
Power connection	Spring clamp 0.14-0.5 mm2
Connection of inputs / outputs	terminal block with spring clamp 0.15-0.5 mm2, push-in
Module operation
Commissioning	The module is operated, set and diagnosed by the MOSAIC or FoxTool programming environment. Further information can be found in the manual Peripheral modules on the CIB TXV 004 13.
Module diagnostics	The basic diagnostics is performed internally and the result is available in the relevant registers of the Mosaic environment.
Maintenance
Description	The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice	Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!
Warranty
Generally	Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s.
Notice	You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.