C-RI-0401R-LOGUS goldTXN 133 47.LTDU

C-RI-0401R-LOGUS gold; CIB, Indoor IR receiver / transmitter, sensors: 1x light intensity, 1xtemperature, 1x AI / DI

DI	1x DI/AI
DO
AI	1x DI / AI see DI
AO
COM	1x CIB slave 1x IR receiver / transmitter
SENSOR	1x Temperature

Picture	Variant	Variant description
	C-RI-0401R-LOGUS, white, TBR	Color: White
	C-RI-0401R-LOGUS, ivory, TMF	Color: Ivory
	C-RI-0401R-LOGUS, ice, TGE	Color: Ice
	C-RI-0401R-LOGUS, Pearl, TPE	Color: Pearl
	C-RI-0401R-LOGUS, aluminum, TAL	Color: Aluminum
	C-RI-0401R-LOGUS, gray, TIS	Color: Grey
	C-RI-0401R-LOGUS black	Color: Black
	C-RI-0401R-LOGUS gold	Color: Gold

C-RI-0401R-LOGUS; CIB. Indoor IR receiver / transmitter, sensors: 1x light intensity, 1x temperature, 1x AI / DI

Order num.	TXN 133 47.LTDU
Teco code	TXN 133 47.LTDU
Categories	CFox - LOGUS, Covers and devices
Tags	-

COM - System buses
CIB - Common Installation Bus (R): Installation I/O bus	1x CIB slave
DI - Organization of binary inputs
Total number of binary inputs	1
DI - Parameters of binary inputs DC (group A)
Combined input type	DI/AI Active, for sensing potential-free contacts and measuring resistance sensors
Galvanic isolation of inputs from internal/peripheral circuits	No
Diagnostics	signaling of excited input in Mosaic
Input current at log. 1 (typ.)	3,3 mA
Delay from log. 0 to log. 1	10 ms
Delay from log. 1 to log. 0	300 ms
The minimum width of the captured pulse	10 ms
Max. measuring voltage on the connected contact	3,3 V DC
AI - Organization of analog inputs
Total number of analog inputs	1
Common wire	Plus
Galvanic separation from internal circuits	No
External power supply	No
Digital resolution	12 bit
Converter type	Approximation
conversion time	500 μs
AI - Analog Input Ranges (Group A)
Parameters valid for inputs on the terminals	DI/AI1
Passive sensor	Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor	Ni1000, W100 = 1.617 (-60 to +200 ° C)
Passive sensor	Resistance transmitter 0-160 kOhm
Passive sensor	KTY81-121; PTC thermistor (-55 to + 125 °C)
Passive sensor	NTC Thermistor 12k / 25 °C (-40 to + 125 °C)
DI: Voltage-free contact	0 when> 1.5 kOhm, 1 when <0.5 kOhm
Input impedance in signal range RTD	> 1 kΩ
Resistance measurement error - maximum error at 25 ° C	± 2% of full scale
Resistance measurement error - temperature coefficient	± 0,1% of full scale
Resistance measurement error - non-linearity	± 0.2% of full scale
Resistance measurement error - repeatability at steady conditions	0.5% of full scale
Detection of disconnected sensor	No
Lighting sensor parameters
Lighting - Sensor type	Photodiode BPW21
Lighting - Measuring range	0 lx ÷ 50000 lx
Lighting - Measurement error	<5% of range
Lighting - Linearity of measurements	± 0.2% of full scale
Lighting - Repeatability under steady state conditions	0.5% of full scale
IR receiver / transmitter parameters
Number of IR receivers	1
Number of IR transmitters	1
Demodulator carrier frequency	36 kHz
Power supply
Supply voltage, tolerances	24/27 V DC from CIB bus
Power supply from CIB - maximum current consumption (mA)	25 mA
Internal protection	No
Size and weight
Weight approx.	75 g
Product dimensions (width x height x depth)	86 × 86 × 35 mm
Operating conditions, product standards
Product standard	ČSN EN 60730-1 ed. 2:2001 (mod IEC 60730-1:1999)
Protection class of electrical object	III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP20
Operating areas	Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Degree of pollution	1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation	II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device	In the installation box on the wall
Working position	Any
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	0 ° C to + 55 ° C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	B, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Electromagnetic compatibility / Immunity	min. according to ČSN EN 60730-1 ed.2: 2001
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Packaginng, transportation, storage
Description	The module, design part and mechanics are packed in bags. All parts are placed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. The product may only be stored in clean rooms free of conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C.
Installation
Assembly description	The C-RI-0401R module is mounted in a vertical position on wall, above a standard installation box with a pitch fixing screws 60 mm. Assembly installation (basic module and possibly peripheral modules) performed according to TXV 004 13.
Connection
Connection description	The combined module is implemented as a CIB bus module, which provides communication and power supply to the module. The CIB bus can have any topology and branching up to a distance of 500 m and up to 32 units on one CIB branch. The CIB bus master is a FOXTROT base unit or module, such as the CF-1141. Further information can be found in the manual Peripheral modules on the CIB TXV 004 13.
Connection of power and system communication	Ribbon flat conductors 0.15 / 0.5 mm2
Connection of inputs / outputs	terminal block with spring clamp 0.15-0.5 mm2, push-in
Module operation
Module configuration	The module is operated, set and diagnosed from the MOSAIC programming environment or other parameterization software. The module is ready for operation after connecting the supply voltage and the CIB bus. The HW address is indicated on the label.
Module diagnostics	The basic diagnostics is performed internally and the result is available in the relevant registers of the Mosaic environment.
Maintenance
Description	The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice	Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!
Warranty
Generally	Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s.
Notice	You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change.