C-RC-0003R-Logus, white TBRTXN 133 37.LTBR

C-RC-0003R-LOGUS white; CIB, Wall controller with LCD-HL1, 3 buttons, temperature and humidity sensor

DI	1x DI/AI 3x Button
DO
AI	1x DI / AI see DI
AO
COM	1x LCD graphic 98x64px
SENSOR	1x Temperature 1x Humidity

Picture	Variant	Variant description
	C-RC-0003R-Logus, white TBR	Color: White
	C-RC-0003R-LOGUS, ivory, TMF	Color: Ivory
	C-RC-0003R-LOGUS, ice, TGE	Color: Ice
	C-RC-0003R-LOGUS, Pearl, TPE	Color: Pearl
	C-RC-0003R-LOGUS, aluminum, TAL	Color: Aluminum
	C-RC-0003R-LOGUS, gray, TIS	Color: Grey
	C-RC-0003R-LOGUS black	Color: Black
	C-RC-0003R-LOGUS gold	Color: Gold

C-RC-0003R-Logus, white TBR

Order num.	TXN 133 37.LTBR
Teco code	TXN 133 37.LTBR
Categories	CFox - LOGUS, Covers and devices
Tags	-

COM - System buses
CIB - Common Installation Bus (R): Installation I/O bus	1x CIB slave
AI - Analog Input Ranges (Group A)
Parameters valid for inputs on the terminals	DI/AI1
Passive sensor	Pt1000, W100 = 1,385 (-90 to +400 ° C)
Passive sensor	Pt1000, W100 = 1,391 (-90 to +400 ° C)
Passive sensor	Ni1000, W100 = 1,500 (–60 to +200 ° C)
Passive sensor	Ni1000, W100 = 1.617 (-60 to +200 ° C)
Passive sensor	Resistance transmitter 0-160 kOhm
Passive sensor	KTY81-121; PTC thermistor (-55 to + 125 °C)
Passive sensor	NTC Thermistor 12k / 25 °C (-40 to + 125 °C)
DI: Voltage-free contact	0 when> 1.5 kOhm, 1 when <0.5 kOhm
DI: Balanced resistance input	2x 1k1 (tamper/0/1/tamper)
Resistance measurement error - maximum error at 25 ° C	± 0.5% of full scale
Power supply
Supply voltage, tolerances	24/27 V DC from CIB bus
Power supply from CIB - typical current consumption (mA)	10 mA
Power supply from CIB - maximum current consumption (mA)	17 mA
Internal protection	No
Size and weight
Weight approx.	75 g
Product dimensions (width x height x depth)	86 × 86 × 35 mm
Operating conditions, product standards
Product standard	ČSN EN 60730-1 ed. 2:2001 (mod IEC 60730-1:1999)
Protection class of electrical object	III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016)
IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989)	IP20
Operating areas	Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005)
Degree of pollution	1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007)
Overvoltage category installation	II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007)
Type of device	In the installation box on the wall
Working position	Any
Type of operation (operating frequency)	Continuous
Ambient operating temperatures	0 ° C to + 55 ° C
Operating relative humidity	from 10 % up to 95 % without condensation
Operating atmospheric pressure	min. 70 kPa (<3,000 m above sea level)
Storage temperatures	–25 °C to +70 °C
Electromagnetic compatibility, Mechanical endurance
Electromagnetic compatibility / Emission	B, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015)
Electromagnetic compatibility / Immunity	min. according to ČSN EN 60730-1 ed.2: 2001
Sinusoidal vibration endurance	10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.)
Connection
Connection description	An example of module connection is shown in the following figure.
Connection of inputs / outputs	terminal block with spring clamp 0.15-0.5 mm2, push-in
Module operation
Module configuration	The module is operated, set and diagnosed from the programming MOSAIC or FoxTool environment. For more information, see the Bus Peripherals module CIB TXV 004 13.
Module diagnostics	The basic diagnostics is performed internally and the result is available in the relevant registers of the Mosaic environment.
Maintenance
Description	The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected.
Notice	Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!!