KB-0290TXN 102 90

• SC-1111-A - ...1111 to the basic Foxtrot module Note: If the module is connected at the end of the TCL2 line, the terminator KB-0290 must be used. The module address on the TCL2 bus is set with the rotary switch. Any type designed for the 868 MH...
• Connecting peripheral FOXTROT modules by fibre-optic cable, the KB-0552 module - ...tor), so it does not have to be located at the end of the metallic line. If it is located at the end of a metallic line, the KB-0290 terminator must be used. The optical interconnection KB-0552 modules should be connected with a duplex 62.5/125 m...
• TCL2 bus installation - ...p;mounted between the TCL2 + and TCL2- signals. For easy installation there is included in the package of the basic module a KB-0290 terminator (a separate order number TXN 102 90), which contains the required 120 Ω terminating resistor, w...
• TCL2 bus – the principles of design and installation - ...at one end of the bus, and the other end must be fitted with a terminating resistor 120  Ω  or with the KB-0290 bus termination module (it is included in the package of each Foxtrot basic module). The modules on the TCL2 bus...
• RF master RF-1131 - ...the RF-1131 module, it is necessary to execute the impedance termination of the line. The termination is executed using the KB-0290 (TXN 102 90, 120Ω) terminating element, which is connected between the TCL2+ and TCL2- terminals. This terminat...

Keine Daten verfügbar.